If your house was constructed prior to the 1920s, its exterior walls may be solid walls. Although it is a good idea to have “solid” walls, they differ from contemporary cavity walls because they let heat be able to escape through their walls. It is therefore advisable to consider Rockwool wall insulation to keep heat in, saving the cost of heating and decreasing CO2 emissions.
What Are The Advantages Of Insulation Of Exterior Walls?
The Rockwool Roof insulation on the exterior of your walls has many advantages. You will not only save up to PS490 annually on heating bills, but your insulation will be installed with no disruption to the interior of your home.
If the exterior walls of your home are old, your insulation can improve the look of your house and also ensure the integrity of the brickwork. It also helps fill in any cracks that are present in the brickwork, thereby removing any draughts they may cause.
How Do I Install It?
For the purpose of Rwa45 insulating solid exterior walls, a layer of insulation material is bonded to the walls by using adhesives and fixings made of metal. Once it is in place, the material is covered by layers of cladding or render.
What Is The Difference Between Rendering And Cladding?
Cladding comes in a variety of attractive colours and shapes, such as lumber panels, shingles tiles made of clay, stones, and aluminum panels. Rendering is, however, can be described as an extremely thick sand and cement mixture that is sprayed on a wire mesh or lighter, thinner cement that is sprayed over a fibrous mesh.
According to your personal preferences the finish can be smooth or the surface may be textured or smooth. If you want to make it easy to maintain the appearance on your outside walls you could decide to paint or pebble-dash your surface.
The finish you choose will be used to cover the entire exterior of your home including the brickwork that you already have and could significantly change the look and appearance of your house. Therefore, you must select your choice with extreme consideration.
Does My House Meet The Principles For Outside Wall Lining?
The insulation of rockwool rwa45 in the exterior is more likely to be efficient if the walls of your exterior have already been rendered and need to be repainted. If you own an older home with a beautiful frontage that could not be suitable for insulation for the wall on the outside.
It is possible to think about investing in exterior insulation for your rear home. But, you might need approval for the work before it is done, especially when your property is classified.
What Are the Current Building Guidelines That Can Affect My Insulation Project?
If you opt to insulate your wall, make sure that your work is in compliance with the current Building Regulations. The most important thing to be adhered to is the energy efficiency of the wall that is insulated.
If you live in England or Wales the wall you choose to install must have a U-value that is at least 0.30 W/m2K. The U-value is a measurement of the speed at which heat can pass through the wall. The less the U-value is, the lower your heating costs are likely to be.
Does My Home Have To Be Prepared For The Installation Of Exterior Wall Insulation?
Before you begin the insulation process the installer should ensure that the recessed areas around the windows are completely covered in insulation, with the amount of the insulation that is required determined by the width of the windows’ frames.
All pipe work on the exterior should be replaced and removed as well as it could be necessary to expand the windowsills and roof overhang to ensure they extend beyond the walls that have been insulated.
Do I Have To Address The Issue With My Insulation Before Work Can Begin?
The insulation on your exterior walls will give your home a weatherproof coating that should keep your home dry for years to come in the future. It will also increase the temperature of the walls of your walls in the interior and reduce the likelihood of condensation becoming an issue.
It is also important to make sure that the new insulation doesn’t overly cover the damp proof layer that is in your walls. The insulation should be placed over this layer to avoid issues with increasing damp. A certified installer who instals an approved external wall insulation product will make sure that your exterior is weatherproof.
Rockwool Wall Insulation To Ensure Healthy And Comfort Indoors And Low Energy Costs
Rockwool thermal insulation may be an answer to the energy insecurity experienced by a large number of houses in Ireland. Statistics show that over 160,000 low-income homes and 60,000 other houses are affected by energy poverty. This is a major factor that affects their health, comforts in the home as well as causing massive waste of a limited amount of income.
Cavity Walls
A cavity wall is constructed of two walls, with an air gap between them or a wall made from hollow blocks. The air gap that is created in this way should be continuous in order for any efficient installation of insulation in a cavity to be achieved.
What Is The Insulation Of The Cavity Walls Is The Cavity Walls Insulated?
Wall insulation for cavity walls can be used in a variety of ways based on the kind and the structure of the wall, the type of insulation chosen, etc. Whatever the insulation material chosen, the goal is to stop heat transfer by cutting off heat transfer principally through conduction (ie. through physical contact) and convection.
What Materials Can Be Used To Create The Cavity Walls?
There are many insulation products that can be used to create the insulation of cavity walls. The most popular materials are Glass fibres, rock wool, Extruded and expanded polystyrene (EPS as well as XPS) beads and panels as well as cellulose materials.
Although cellulose isn’t widely used in Ireland but in other countries, like the USA it is extensively used because of its high R-factor (at minimum at first) with a low price, and is produced from recycled materials (and thus is environmentally friendly).
In the course of construction, it is possible to insulate the cavity walls using all of the above materials (though it is not a common practice) after the construction phase or in older buildings, glass fibres or polystyrene beads are able to be used only through the process known as “bowing into”.
The holes are made on the walls and then checked to see if insulation is in place and, if it is, in the condition it is in. If the cavity isn’t filled with insulation, fibres or insulation beads are blown into the cavity using a hose and inserted through the holes. The special glue is forced in together with polystyrene beads to ensure that the beads remain bonded following curing.
Air Leaks, Moisture And Insulation
Air leaks and moisture, while not the sole factor, can contribute to the loss of heat energy, and also in damaging the insulation, which reduces the performance of the insulation of the core fill, harming the wall material, and encouraging the growth of mould.
Vapour barriers that are effective must be used even with cavities wall insulation. A foil of aluminium fitted with a water-resistant adhesive or liquid vapour barrier is a good option (regional fire codes allow). Additionally, an aluminum vapour barrier acts as an effective radiant heat barrier, increasing the efficiency of energy.